Developer Tools · head to head
Envoy vs Teamgantt

Envoy
Developer Tools
A high-performance L7 proxy written in C++ that is configured by an API rather than a config file, and is usually deployed under a control plane.
- From
- Free
- Free plan
- Yes

Teamgantt
Project Management
Collaborative Gantt chart software
- From
- Free
- Free plan
- Yes
The short version
- Envoy is free; Teamgantt starts at $24/mo.
- Only Envoy lists xDS dynamic configuration; only Teamgantt lists gantt charts.
- Where Teamgantt falls short: the free plan is limited to 1 project and 40 tasks.
- Prices and features on this page were last checked on 13 November 2026.
Where they differ
Only the attributes on which Envoy and Teamgantt actually diverge.
Identical on both: starting price (Free), free tier (Yes), platforms (Web).
Not yet recorded: founded for Envoy.
What each one covers
Drawn from each product's published feature list. An absence here means we hold no record of it - not that the product lacks it.
Only in Envoy
- xDS dynamic configuration
- Protocol breadth
- Filter chain architecture
- Observability by default
- Outlier detection
- Traffic shaping
- mTLS termination and origination
- Hot restart
Only in Teamgantt
- Gantt charts
- Dependencies
- Milestones
- Baselines
- Time tracking
- Slack
- Trello
- Dropbox
What people use each for
The jobs each tool is most often brought in to do.
Envoy
- Acting as the data plane under a service mesh or Gateway API implementation, which is how the overwhelming majority of deployments use itnot Teamgantt
- An edge or API gateway that needs per-route retry budgets, circuit breaking and outlier detection rather than round-robin proxyingnot Teamgantt
- Migrating traffic between service versions or between a monolith and its replacement, using weighted splits and shadow trafficnot Teamgantt
- Standardising observability across a polyglot estate, so that latency, error rates and tracing look the same regardless of the language a service is written innot Teamgantt
Teamgantt
- Project and task managementnot Envoy
- Gantt chart planning and schedulingnot Envoy
Where each one falls short
Documented limitations, not opinions. Every one is a constraint you would hit in normal use.
Envoy
- The configuration surface is very large and hand-written bootstrap YAML runs to hundreds of lines for routing that Nginx expresses in twenty, which is why nearly every production deployment sits under a control plane and inherits that control plane's constraints as well
- xDS is the real API and it is not stable in the comfortable sense; the v2 API set was removed outright, resource types continue to be deprecated, and your control plane and Envoy binaries have to be upgraded roughly in step or the proxies stop accepting configuration
- Extending it properly means writing a C++ filter and building and maintaining your own Envoy binary; the alternatives are Lua, which adds per-request overhead, and proxy-wasm, whose ABI has remained effectively experimental for years with a real performance cost
- At sidecar density the per-proxy memory and CPU footprint is a measurable share of cluster capacity, since thousands of workloads each carry a full proxy, and this is precisely the cost that has pushed mesh projects towards node-level or ambient architectures
- There is no single vendor selling support for Envoy itself; you get the community plus control-plane vendors such as Solo.io and Tetrate, so an Envoy-level production bug is your own engineers in a C++ codebase unless a support contract happens to cover it
- Diagnosing why a request got a particular response involves reading config dumps, the stats endpoint and the RESPONSE_FLAGS codes in access logs rather than a readable error, which is a specific skill you must hire or spend months growing
Teamgantt
- The free plan is limited to 1 project and 40 tasks
- Pricing is per project rather than per user, so cost scales with how much work is tracked
- The Basic plan at $10 a month allows a single manager
- Project health reports, cost loaded scheduling and custom boards are paid add ons on Basic at $12 to $24 a month each
- The Builder Edition advertises $99 a month and rises to $199 after 3 months
Pricing, plan by plan
Envoy
FreeNo published plan breakdown. See the Envoy review.
Teamgantt
Free- PersonalFree
- 1 user
- 1 project
- 40 tasks
- Basic$24/mo
- 1 manager
- 10 collaborators
- 2 projects included
- Business$120/mo
- Unlimited managers and collaborators
- 500 tasks per project
- 5 projects included
- Builder Edition$199/mo
- Unlimited everything
- Industry-specific tools
- Personalized onboarding
Which should you pick?
Choose Envoy if
- You need xds dynamic configuration.
- You want to start without paying.
- You also want protocol breadth.
Choose Teamgantt if
- You need gantt charts.
- You want to start without paying.
- You also want dependencies.
Questions people ask
- Is Envoy or Teamgantt better?
- Neither clearly leads. Envoy starts at Free and Teamgantt at Free, and user ratings are close enough to be indistinguishable. Choose on capability and platform support.
- Which is cheaper, Envoy or Teamgantt?
- Envoy starts at Free and Teamgantt at Free.
- Does Envoy or Teamgantt run on more platforms?
- Both run on Web, so platform support will not decide this one for you.
- Can I use Envoy for free?
- Both have a free tier, so you can try either at no cost before committing.
- What is Envoy best used for?
- Envoy is most often used for acting as the data plane under a service mesh or gateway api implementation, which is how the overwhelming majority of deployments use it, an edge or api gateway that needs per-route retry budgets, circuit breaking and outlier detection rather than round-robin proxying, migrating traffic between service versions or between a monolith and its replacement, using weighted splits and shadow traffic, standardising observability across a polyglot estate, so that latency, error rates and tracing look the same regardless of the language a service is written in. Of those, acting as the data plane under a service mesh or gateway api implementation, which is how the overwhelming majority of deployments use it and an edge or api gateway that needs per-route retry budgets, circuit breaking and outlier detection rather than round-robin proxying are not what Teamgantt is typically brought in for.
- What can Envoy do that Teamgantt cannot?
- Envoy covers xDS dynamic configuration, Protocol breadth, Filter chain architecture, Observability by default. Teamgantt covers Gantt charts, Dependencies, Milestones, Baselines.
Answered from the vendors’ own pages
Envoy: Should I run Envoy on its own, or under a control plane?
Almost always under one. Directly authoring xDS or static bootstrap configuration is viable for a handful of routes and becomes unmanageable beyond that. Envoy Gateway, Istio, Contour, Gloo and Consul all exist to generate that configuration for you.
Teamgantt: How much does TeamGantt cost?
TeamGantt offers a free Personal plan (1 user, 1 project). Paid plans start at $24/month for Basic and go up to $199/month for Builder Edition.
SourceEnvoy: How does it compare with Nginx or HAProxy?
Envoy is dynamically configured over an API and instrumented far more heavily; Nginx and HAProxy are faster to configure and lighter for straightforward reverse proxying. If you never need to change routing without a reload, Envoy is more machinery than the problem requires.
Teamgantt: Does TeamGantt have a free trial?
Yes, TeamGantt provides a 14-day free trial with full access to any paid plan features, though credit card is required to start.
SourceEnvoy: What does it cost?
Nothing to licence; it is Apache 2.0 and there is no paid edition. The cost is engineering time and, for most organisations, a commercial control plane or cloud service that packages it.
Teamgantt: Can I cancel TeamGantt anytime?
Yes, TeamGantt has no long-term contracts and allows users to cancel anytime or downgrade to the free Personal plan.
SourceEnvoy: Can I write extensions without C++?
You can write Lua filters or proxy-wasm modules in Rust, Go, C++ or AssemblyScript. Both carry per-request overhead compared with a native filter, and the Wasm path has been slower to stabilise than the project originally projected.
Envoy: Is it a CNCF project?
Yes, it is a graduated CNCF project licensed under Apache 2.0, which means the trademark and governance sit with the foundation rather than with Lyft or any vendor.
Related pages
Other head to heads
- Envoy vs Istio
- Envoy vs Ona (formerly Gitpod)
- Envoy vs Spacelift
- Envoy vs Atlantis
- Envoy vs Jenkins
- Envoy vs Hookdeck
- Envoy vs Restate
- Envoy vs Helix
- Envoy vs Turborepo
- Envoy vs StackBlitz
- Envoy vs Webpack
- Envoy vs Backstage
- Envoy vs OpsLevel
- Envoy vs PartyKit
- Envoy vs PhpStorm
- Envoy vs Pieces for Developers
- Envoy vs RAD Studio
- Envoy vs Refact
- Envoy vs Trello
- Envoy vs Basecamp
- Envoy vs GanttPRO
- Envoy vs Teamhood
- Envoy vs Toggl Plan
- Envoy vs LiquidPlanner
- Envoy vs MeisterTask
- Envoy vs Freedcamp
- Envoy vs Asana
- Envoy vs Reclaim.ai
- Envoy vs Roadmunk
- Envoy vs Craft Docs
- Envoy vs Visor
- Envoy vs Zoho Projects
- Envoy vs ClickUp
- Envoy vs Linear
- Envoy vs Monday.com
- Envoy vs Jira
- Teamgantt vs Istio
- Teamgantt vs Ona (formerly Gitpod)
- Teamgantt vs Spacelift
- Teamgantt vs Atlantis
- Teamgantt vs Jenkins
- Teamgantt vs Hookdeck
- Teamgantt vs Restate
- Teamgantt vs Helix
- Teamgantt vs Turborepo
- Teamgantt vs StackBlitz
- Teamgantt vs Webpack
- Teamgantt vs Backstage
- Teamgantt vs OpsLevel
- Teamgantt vs PartyKit
- Teamgantt vs PhpStorm
- Teamgantt vs Pieces for Developers
- Teamgantt vs RAD Studio
- Teamgantt vs Refact
- Teamgantt vs Trello
- Teamgantt vs Basecamp
- Teamgantt vs GanttPRO
- Teamgantt vs Teamhood
- Teamgantt vs Toggl Plan
- Teamgantt vs LiquidPlanner
- Teamgantt vs MeisterTask
- Teamgantt vs Freedcamp
- Teamgantt vs Asana
- Teamgantt vs Reclaim.ai
- Teamgantt vs Roadmunk
- Teamgantt vs Craft Docs
- Teamgantt vs Visor
- Teamgantt vs Zoho Projects
- Teamgantt vs ClickUp
- Teamgantt vs Linear
- Teamgantt vs Monday.com
- Teamgantt vs Jira
