Softwr

Databases · head to head

DynamoDB vs Envoy

DynamoDB logo

DynamoDB

Databases

AWS-only managed key-value and document database with fixed per-partition throughput limits and no ad hoc queries.

From
Free
Free plan
Yes
Visit DynamoDBFull review
Envoy logo

Envoy

Developer Tools

A high-performance L7 proxy written in C++ that is configured by an API rather than a config file, and is usually deployed under a control plane.

From
Free
Free plan
Yes
Visit EnvoyFull review

The short version

  • Envoy is free; DynamoDB starts at $0.625/mo.
  • Only DynamoDB lists managed and serverless; only Envoy lists xDS dynamic configuration.
  • Prices and features on this page were last checked on 13 November 2026.

Where they differ

Only the attributes on which DynamoDB and Envoy actually diverge.

Attributes where DynamoDB and Envoy differ
AttributeDynamoDBEnvoy
Pricing modelUsage-basedOpen-source
PlatformsAWSWeb
CategoryDatabasesDeveloper Tools

Identical on both: starting price (Free), free tier (Yes).

Not yet recorded: founded for Envoy.

What each one covers

Drawn from each product's published feature list. An absence here means we hold no record of it - not that the product lacks it.

Only in DynamoDB

  • Managed and serverless
  • Predictable latency
  • On-demand or provisioned capacity
  • Global secondary indexes
  • Transactions
  • DynamoDB Streams
  • Global tables
  • Point-in-time recovery

Only in Envoy

  • xDS dynamic configuration
  • Protocol breadth
  • Filter chain architecture
  • Observability by default
  • Outlier detection
  • Traffic shaping
  • mTLS termination and origination
  • Hot restart

What people use each for

The jobs each tool is most often brought in to do.

DynamoDB

  • High-volume keyed workloads such as sessions, shopping carts, device state or user profiles where the access pattern is fixed and knownnot Envoy
  • Traffic that spikes unpredictably, where on-demand capacity absorbs a burst without a capacity-planning exercisenot Envoy
  • Serverless applications on Lambda, where an HTTP-based datastore avoids the connection pooling problem relational databases havenot Envoy
  • Event or telemetry ingestion where writes vastly outnumber reads and each record is retrieved by a known identifiernot Envoy

Envoy

  • Acting as the data plane under a service mesh or Gateway API implementation, which is how the overwhelming majority of deployments use itnot DynamoDB
  • An edge or API gateway that needs per-route retry budgets, circuit breaking and outlier detection rather than round-robin proxyingnot DynamoDB
  • Migrating traffic between service versions or between a monolith and its replacement, using weighted splits and shadow trafficnot DynamoDB
  • Standardising observability across a polyglot estate, so that latency, error rates and tracing look the same regardless of the language a service is written innot DynamoDB

Where each one falls short

Documented limitations, not opinions. Every one is a constraint you would hit in normal use.

DynamoDB

  • Access patterns must be designed into the key schema before launch; a query nobody anticipated needs a new global secondary index, which is a full extra copy of the projected attributes billed as storage and as writes, or an offline migration
  • Global secondary indexes are eventually consistent and cannot be read strongly, so a read-after-write against an index can legitimately miss the item that was just written, and application code must be written to tolerate that
  • Per-partition throughput is capped at roughly 3,000 read and 1,000 write units, so a hot key throttles even when the table has spare capacity overall, and the only real fix is changing the key design to spread the load
  • Items are limited to 400 KB and query results paginate at 1 MB, so large or list-shaped data has to be split, offloaded to S3 with a pointer, or read through pagination loops that complicate every consumer
  • It runs only on AWS and the API is proprietary rather than a standard, so moving the data layer means rewriting it; ScyllaDB's Alternator is the only meaningfully compatible target and it brings a much smaller ecosystem

Envoy

  • The configuration surface is very large and hand-written bootstrap YAML runs to hundreds of lines for routing that Nginx expresses in twenty, which is why nearly every production deployment sits under a control plane and inherits that control plane's constraints as well
  • xDS is the real API and it is not stable in the comfortable sense; the v2 API set was removed outright, resource types continue to be deprecated, and your control plane and Envoy binaries have to be upgraded roughly in step or the proxies stop accepting configuration
  • Extending it properly means writing a C++ filter and building and maintaining your own Envoy binary; the alternatives are Lua, which adds per-request overhead, and proxy-wasm, whose ABI has remained effectively experimental for years with a real performance cost
  • At sidecar density the per-proxy memory and CPU footprint is a measurable share of cluster capacity, since thousands of workloads each carry a full proxy, and this is precisely the cost that has pushed mesh projects towards node-level or ambient architectures
  • There is no single vendor selling support for Envoy itself; you get the community plus control-plane vendors such as Solo.io and Tetrate, so an Envoy-level production bug is your own engineers in a C++ codebase unless a support contract happens to cover it
  • Diagnosing why a request got a particular response involves reading config dumps, the stats endpoint and the RESPONSE_FLAGS codes in access logs rather than a readable error, which is a specific skill you must hire or spend months growing

Pricing, plan by plan

DynamoDB

Free
  • On-Demand CapacityOn request
    • Pay-per-request pricing with automatic scaling
    • Read: 0.5 RRU per 4 KB (eventually consistent), 1 RRU per 4 KB (strongly consistent), 2 RRU per 4 KB (transactional)
    • Write: 1 WRU per 1 KB
  • Provisioned CapacityOn request
    • Fixed hourly charges based on reserved capacity
    • RCU rate: $0.00013 per hour (Standard)
    • WCU rate: $0.00065 per hour (Standard)
  • Standard Table Class Storage$0.25/per gb/month
    • $0.25 per GB/month after free tier
    • First 25 GB free per month (free tier)
  • Standard-Infrequent Access Table Class$0.1/per gb/month
    • $0.10 per GB/month

Envoy

Free

No published plan breakdown. See the Envoy review.

Which should you pick?

Choose DynamoDB if

  • You need managed and serverless.
  • You want to start without paying.
  • You work on AWS.
  • You also want predictable latency.
DynamoDB review

Choose Envoy if

  • You need xds dynamic configuration.
  • You want to start without paying.
  • You also want protocol breadth.
Envoy review

Questions people ask

Is DynamoDB or Envoy better?
Neither clearly leads. DynamoDB starts at Free and Envoy at Free, and user ratings are close enough to be indistinguishable. Choose on capability and platform support.
Which is cheaper, DynamoDB or Envoy?
DynamoDB starts at Free and Envoy at Free.
Does DynamoDB or Envoy run on more platforms?
DynamoDB runs on AWS. Envoy runs on Web.
Can I use DynamoDB for free?
Both have a free tier, so you can try either at no cost before committing.
What is DynamoDB best used for?
DynamoDB is most often used for high-volume keyed workloads such as sessions, shopping carts, device state or user profiles where the access pattern is fixed and known, traffic that spikes unpredictably, where on-demand capacity absorbs a burst without a capacity-planning exercise, serverless applications on lambda, where an http-based datastore avoids the connection pooling problem relational databases have, event or telemetry ingestion where writes vastly outnumber reads and each record is retrieved by a known identifier. Of those, high-volume keyed workloads such as sessions, shopping carts, device state or user profiles where the access pattern is fixed and known and traffic that spikes unpredictably, where on-demand capacity absorbs a burst without a capacity-planning exercise are not what Envoy is typically brought in for.
What can DynamoDB do that Envoy cannot?
DynamoDB covers Managed and serverless, Predictable latency, On-demand or provisioned capacity, Global secondary indexes. Envoy covers xDS dynamic configuration, Protocol breadth, Filter chain architecture, Observability by default.

Answered from the vendors’ own pages

DynamoDB: On-demand or provisioned capacity?

On-demand suits unpredictable or spiky traffic and removes capacity planning. Provisioned with autoscaling is considerably cheaper for steady high-volume workloads. Tables can be switched between them, though not arbitrarily often.

Envoy: Should I run Envoy on its own, or under a control plane?

Almost always under one. Directly authoring xDS or static bootstrap configuration is viable for a handful of routes and becomes unmanageable beyond that. Envoy Gateway, Istio, Contour, Gloo and Consul all exist to generate that configuration for you.

DynamoDB: Can I run DynamoDB outside AWS?

No. DynamoDB Local exists for development and testing only. For a production-compatible alternative elsewhere, ScyllaDB's Alternator implements the DynamoDB API, but it is a different system with a different ecosystem.

Envoy: How does it compare with Nginx or HAProxy?

Envoy is dynamically configured over an API and instrumented far more heavily; Nginx and HAProxy are faster to configure and lighter for straightforward reverse proxying. If you never need to change routing without a reload, Envoy is more machinery than the problem requires.

DynamoDB: Can I run ad hoc queries or analytics?

Not on the table itself. Scans are slow and expensive at scale. The usual pattern is to export to S3 or stream changes out and query them in Athena, Redshift or another analytical engine.

Envoy: What does it cost?

Nothing to licence; it is Apache 2.0 and there is no paid edition. The cost is engineering time and, for most organisations, a commercial control plane or cloud service that packages it.

DynamoDB: Is single-table design necessary?

It is the pattern that gets the most from DynamoDB when access patterns are well known, because it lets related items be retrieved in one query. It also makes the model harder to evolve, so many teams reasonably choose multiple simpler tables and accept extra requests.

Envoy: Can I write extensions without C++?

You can write Lua filters or proxy-wasm modules in Rust, Go, C++ or AssemblyScript. Both carry per-request overhead compared with a native filter, and the Wasm path has been slower to stabilise than the project originally projected.

DynamoDB: What are the real limits I should design around?

400 KB per item, 1 MB per query or scan page, 100 items per transaction, roughly 3,000 read and 1,000 write units per partition, and eventual consistency on global secondary indexes.

Envoy: Is it a CNCF project?

Yes, it is a graduated CNCF project licensed under Apache 2.0, which means the trademark and governance sit with the foundation rather than with Lyft or any vendor.

Share

Related pages

More on DynamoDB

More on Envoy

Keep looking

Other head to heads