Softwr

Guide

Fashion pattern making software in 2026: what AccuMark, Modaris, CLO and Browzwear cost and who they suit

Apparel software splits into 2D pattern making and grading, marker making, 3D garment simulation and product lifecycle management, and the price conversation is different for each. The two industrial standards, Gerber AccuMark and Lectra Modaris, publish no price at all and sell by quote. The 3D tools are far more open: CLO and Browzwear now list self-serve plans from tens of dollars a month. This guide sets out what is published, what is not, and which tool fits which kind of buyer.

By Softwr Editorial, Software research teamPublished 14 min read
Share

The short answer

  • Neither Gerber AccuMark nor Lectra Modaris publishes a price: both are sold by quote, and since Lectra bought Gerber in 2021 both are sold on the same subscription terms of one or three years with software, remote support and upgrades in a single annual fee.
  • CLO and Browzwear are the only major 3D garment tools with published self-serve prices: CLO lists $25 a month for students and $50 a month for individuals, and Browzwear lists $75 a month or $750 a year for its Freelancer plan.
  • Any company with two or more employees is steered to a quoted CLO Enterprise plan, so the $50 individual plan is for freelancers and one-person businesses only.
  • DXF-AAMA and DXF-ASTM are the interchange formats that let a pattern leave one system and open in another, but every vendor describes the result as usable rather than lossless, so test a file with your factory before you commit.
  • The honest split is that 2D CAD with grading and marker making is what factories cut from, 3D simulation is what brands use to cut physical samples, and a freelancer can start with a low-cost 3D subscription or free open-source pattern drafting.

What apparel pattern software actually covers

People searching for "fashion pattern making software" are usually after one of four different products, and the confusion between them is why prices look so inconsistent when you compare vendors.

  • 2D pattern making and grading. Drafting the flat pieces of a garment, adding seam allowances and notches, and scaling a base size to a full size range. This is the core of Gerber AccuMark, Lectra Modaris, Optitex and Tukatech's TUKAcad.
  • Marker making. Nesting every graded piece onto a width of fabric so that as little cloth as possible is wasted. Factories care about this more than anything else on the list, because fabric is usually the largest cost in a garment.
  • 3D garment simulation. Draping the 2D pieces on an avatar to check fit and appearance before a sample is sewn. CLO 3D, Browzwear VStitcher and Style3D live here.
  • Product lifecycle management (PLM). The system that holds tech packs, bills of materials, supplier data and approvals across a collection. Centric PLM and Wave PLM are examples, and they sit alongside rather than replace the pattern tool.

The tools overlap more each year. Modaris has a 3D module that links 2D patterns to 3D prototypes so an adjustment to one updates the other, and the 3D tools export graded patterns back out as DXF. But the centre of gravity of each product is still clear, and it is the best guide to which one you need.

The comparison at a glance

ProductCentre of gravityHow it is soldPublished price
Gerber AccuMark2D patterns, grading, markersQuote, subscription via LectraNone
Lectra Modaris2D patterns, grading, 3D moduleQuote, 1 or 3 year subscriptionNone
Optitex2D/3D patterns, markersConsultative, demo firstNone
Tukatech TUKAcad2D patterns, grading, markersOnline subscription, or demoFrom $19 a month
CLO 3D3D simulation with 2D pattern toolsSelf-serve or Enterprise quote$25 and $50 a month
Browzwear VStitcher3D simulation, validated blocksSelf-serve or Enterprise quote$75 a month upwards
Seamly2DParametric pattern draftingFree downloadFree
Centric PLMProduct lifecycle managementDemo, quoteNone

Treat the table as a map of the market, not a ranking. The rest of this guide takes the products in the order in which people search for them: the industrial 2D standards, then 3D, then everything else.

Gerber AccuMark and Lectra Modaris: price and how they are sold

This is the section most readers arrive for, and the honest answer is short: neither vendor publishes a price. Anyone quoting you a precise AccuMark or Modaris figure from a listicle is repeating a quote someone else received, which varies by country, by module and by number of seats.

Why they are priced together now

The two products used to be competitors. Lectra completed its acquisition of Gerber Technology on 1 June 2021, reported at 175 million euros on a cash-free, debt-free basis, and both fashion CAD lines now sit under one owner. That matters for buyers because the commercial terms have converged. Lectra describes one subscription offer that covers both Modaris and AccuMark, and it runs a trade-in route for customers of either.

How the subscription works

From Lectra's own material, the documented terms are:

  • Term. One year or three years, paid annually. Individual licences can be cancelled if you no longer need them.
  • What the fee includes. The CAD software, remote technical support and regular upgrades, in one annual charge. Lectra's Modaris page cites two upgrades per year.
  • Licence key. Each new licence comes with a digital key rather than a physical dongle.
  • Trade-in. A customer with an existing perpetual licence can trade it in for a subscription at a discounted rate for the first two years, or keep the perpetual licence and add subscription seats alongside it.
  • Accounting. Lectra frames this as operating expenditure rather than a capital purchase, which is a real consideration for a small factory that would otherwise need budget approval for a large upfront licence.

Lectra's page describes the licences as available "at an affordable price" and gives no number. Third-party listings are no better: Capterra shows "contact vendor" for AccuMark and Techjockey lists "price on request". If you need a figure for a budget, request quotes from Lectra or a regional reseller for the specific modules and seat count you need, and ask for the three-year total, because a one-year price and a three-year price are not the same number repeated.

What Modaris is, in tiers

Modaris is sold in editions. Per Lectra, Modaris Essential and Classic handle pattern creation, grading and file sharing; Modaris Expert adds parametric tools that Lectra says can cut pattern adjustment time by up to 30 per cent; Modaris 3D handles virtual prototyping; and add-ons include a fabric consumption estimator. Lectra's page names 2026.2 as the current release. The tier you need changes the quote, so be specific about which you are asking for.

What AccuMark adds

AccuMark's reputation rests on its long history in factory pattern rooms and on marker making, which is the module that decides fabric usage. It is the system many contract manufacturers already own, which is the practical reason brands specify it: if your factory runs AccuMark, a native file avoids the translation step. Gerber also offered a subscription from 2016 in three-month increments for companies that needed extra seats for part of the year, according to trade press at the time, but treat that as history; the current terms are the Lectra ones above.

If the quote is the obstacle, the AccuMark against Modaris comparison sets the features side by side, and the AccuMark pricing page and Modaris pricing page record what is and is not known. For options that publish more, see the AccuMark alternatives and Modaris alternatives.

3D garment software: CLO, Browzwear and the rest

3D tools are the part of the market that changed most recently, and the one place where pricing is now openly listed. They simulate fabric on an avatar so a designer can judge fit and drape on screen. They have not replaced physical samples at most brands, but they have cut the number of rounds.

CLO 3D

CLO lists four plans on its pricing page:

  • Student: $25 a month.
  • Individual: $50 a month, for freelancers and one-person businesses.
  • Enterprise: custom pricing, for any company with two or more employees, including small studios. CLO says so explicitly, even if only one person will use it.
  • Academic: custom pricing, for institutions.

Plans can be billed monthly or yearly, with CLO advertising a 25 per cent saving for yearly billing, and all prices exclude tax. A free trial exists but the page does not describe its length or limits. The rule worth noticing is the two-employee line: a three-person label is outside the terms of the $50 plan, so the realistic cost for a small company is a quote. The CLO pricing page tracks this, and the CLO alternatives list covers the field.

Browzwear VStitcher

VStitcher from Browzwear moved from sales-led to partly self-serve in February 2026. Browzwear's announcement lists:

  • Freelancer: $75 a month or $750 a year, one user, the latest VStitcher version, local desktop rendering and community support.
  • Freelancer Plus: $150 a month or $1,500 a year, adding access to the two latest versions.
  • Teams: $3,950 a year, for one Stylezone site with up to three named active users, with limited cloud render and AI credits. The announcement says this is per user, while the pricing page wording is less clear on the basis, so confirm which applies before you budget.
  • Enterprise: custom pricing, with dedicated support.

Browzwear also offers a free six-month Learner License for students in accredited programmes and graduates within six months, for non-commercial use with limited features, and approval is required. Its pitch is a workflow built on validated blocks, which suits brands that reuse a fit standard across many styles. See the VStitcher pricing page and alternatives.

Style3D and Marvelous Designer

Style3D competes directly with CLO and Browzwear in 3D apparel, and its product and price structure is covered on its own page. Marvelous Designer shares CLO's roots but is aimed at game, film and character artists rather than factory production: it publishes self-serve prices including a student tier, and it is the wrong tool if your output is a graded, markable pattern. The Marvelous Designer pricing page has the details.

Head to head, the VStitcher against CLO comparison and the CLO against Marvelous Designer comparison are the two most useful, and the CLO against Style3D comparison covers the third rival.

Optitex, Tukatech and the other 2D systems

AccuMark and Modaris are the names people know, but they are not the whole 2D market.

Optitex

Optitex sells 2D and 3D pattern design, marker making, and an array of production modules such as print and cut and fabric management, bundled for fashion, automotive and furniture. Its site shows no prices and routes buyers to a demo, consultation and proof of concept, which is the same consultative model as the Lectra products. It describes the portfolio as open to standard software and hardware formats, which is a claim worth testing with a real file. The Optitex against Tukatech comparison, the CLO against Optitex comparison and the AccuMark against Optitex comparison cover the practical differences, and the Optitex pricing page records the current position.

Tukatech

Tukatech is the notable exception to the quote-only industrial model. Its site lists TUKAcad, a 2D pattern making and grading tool with an automatic pattern maker that generates patterns from measurement specifications, TUKA3D for 3D fit and virtual sampling, and SMARTmark for automatic marker making. Subscriptions to TUKAcad are sold online and Tukatech advertises them from $19 a month, with TUKAcad 2026 subscribers receiving pattern and 3D assets at no extra cost. Two cautions. First, $19 is a "from" price and the page does not say which edition it covers. Second, an older Tukatech article from 2016 quoted $25 a month for a learning edition, so the numbers have moved; confirm on the Tukatech subscription page before you rely on either. TUKA3D and SMARTmark carry no published price. There is also Tukatech Designer in our catalogue, and the CLO against Tukatech comparison is useful if you are choosing between a 3D-first and a 2D-first route. See the Tukatech pricing page.

The regional and specialist systems

Several other CAD packages serve specific markets, and the category page lists them all under fashion software. AVA CAD/CAM, Romans CAD, StyleCAD and Pointcarre are examples with regional strength or a focus on particular garment types. Knitwear is its own world: Shima Seiki and Stoll make the knitting machines and the software that programmes them, and a woven-garment CAD will not do that job.

Seamly2D and open-source drafting

Seamly2D, the continuing fork of the Valentina project, describes itself as open-source patternmaking software "to democratize fashion". The project is licensed GPLv3 or later, ships for Windows 10 and 11, macOS Ventura to Tahoe on Apple Silicon or Intel, and Linux through an AppImage and Flatpak, and published a new release on the day this guide was written. It works parametrically, building patterns from measurement files, either multi-size or individual. We could not confirm from the project pages we could read whether it exports DXF-AAMA or DXF-ASTM, which matters if you plan to send patterns to a factory, so test an export before you build a workflow around it. It is not in our catalogue, so it has no page here.

File formats and interoperability: DXF-AAMA and DXF-ASTM

Software choice is also a file choice. A pattern is only useful if the next person in the chain, usually a factory, can open it.

What the formats are

DXF-AAMA is a DXF-based exchange format for 2D pattern pieces, developed by the American Apparel Manufacturers Association in 1993 and referenced as ANSI/AAMA-292A. ASTM D6673 was developed as its successor and keeps the DXF base with grade rules in a separate plain text file. It covers pattern pieces within a style, with piece and style information, and excludes cutter or plotter instructions, marker data and product specifications. ASTM's catalogue lists the standard as withdrawn in 2019, so the format survives as a convention that software vendors continue to support rather than as a maintained standard. In practice you will see "DXF-AAMA" and "DXF-ASTM" as two options on an export menu, plus plain DXF.

What support looks like in practice

CLO's support documentation is the clearest published account. CLO imports and exports standard DXF, DXF-AAMA and DXF-ASTM, can deliver grading as a separate rule file, and states that it works with pattern CAD systems including YUKA, Gerber, Lectra, StyleCAD, Optitex and PAD System. Lectra offers a Pattern Converter, a web add-on that converts DXF AAMA and DXF ASTM files to the native Modaris MDL V8 format, which tells you something: the native formats are richer than the exchange formats, and conversion is a deliberate step.

Where it goes wrong

Interchange is lossy in predictable places, and community reports on CLO's support forums describe them: scale problems on import, changed seam corners or seam allowances after a round trip, line types for cut and sew lines differing between tools, and complex curves arriving with too many points. These are community reports rather than vendor statements, but they match what pattern makers say in general. The practical advice is:

  1. Ask the factory which native system and version it uses, and which exchange format it accepts.
  2. Export a single graded style and have the factory open it before you commit to a tool.
  3. Keep the native file as the archive, and treat DXF as a delivery format.
  4. Check that notches, grainlines and grade rules survived, not just the outlines.

If your factory runs AccuMark or Modaris, a 3D tool such as CLO will usually exchange patterns with it through this route. The AccuMark against Modaris comparison notes where the two native formats differ.

Who should pick which tool

The right choice follows from who you are and what you hand to whom.

You areStart withWhyWatch for
A factory or pattern room cutting productionAccuMark, Modaris, Optitex or TUKAcadGrading and marker making are the daily workQuote-only pricing, seat counts, version compatibility with customers
A brand with a factory partnerWhatever your factory runs, plus a 3D toolNative files avoid translation lossesEnterprise quotes for CLO and Browzwear
A small label of two or more peopleCLO Enterprise, Browzwear Teams, TUKAcadPlans for individuals exclude companiesPer-user pricing and credit limits
A freelance designerCLO Individual or Browzwear FreelancerPublished prices, monthly billing$50 to $75 a month is a real cost without a client
A studentCLO Student, Browzwear Learner License, free drafting toolsLow-cost or free, school-recognisedNon-commercial restrictions
A game or film artistMarvelous DesignerBuilt for visual output, not productionNo grading or markers
A knitwear makerShima Seiki or Stoll softwareTied to the knitting machinesMachine-specific

The learning curve

No vendor publishes a time-to-competence figure, and anyone who does is guessing. The reliable pattern is this. 2D pattern CAD rewards people who already draft patterns by hand or on paper: the tools are exacting and the interface is dense, but the concepts are familiar to a trained pattern maker. 3D tools are easier to start with visually and harder to master, because getting realistic drape depends on correct fabric properties and a clean 2D pattern underneath. A student should expect to be productive in a basic 3D tool quickly and to spend much longer before a pattern is good enough for a factory. Both CLO and Browzwear bundle learning material into their plans, and Tukatech sells itself on live demos with your own styles.

Switching costs

The decision is stickier than the monthly price suggests. Native files, trained staff and factory habits all tie you in. The CLO alternatives list and Optitex alternatives list are useful when you are replacing a system, but the working assumption should be that moving costs weeks of retraining, not just a new subscription.

Free options, design tools and PLM

What is free

Free is narrower than it sounds. The genuinely free route for pattern making is Seamly2D, open source under GPLv3 or later, with the export caveat above. CLO and Browzwear are not free but have trials or student routes: CLO offers a free trial of unstated length, and Browzwear's Learner License is free for six months for eligible students. Tukatech's older learning offer was a low-cost 30-day trial, but that was 2016 and is not evidence of a current one. For flat sketches and technical drawings, many designers still use Adobe Illustrator, which is paid, and Techpacker targets the tech pack step directly.

Where PLM fits

A PLM system does not draft a pattern. It holds the tech pack, bill of materials, specification measurements, supplier communication and approvals, so that the pattern, the sample and the order refer to the same style. Centric PLM, Wave PLM, Delogue PLM, Backbone PLM and BlueCherry PLM are all in our catalogue, and the Centric against Wave comparison is the starting point. Centric's site gives no pricing and directs visitors to request a demo, which is the norm in this segment. The vendor's quoted results, such as faster time to market, are marketing figures with no named customer attached, so weigh them accordingly.

Sizing and fit

Fit data is a separate adjacent category, covered by tools such as 3DLOOK for body measurement. It feeds a pattern or a size recommendation rather than replacing the pattern tool.

All of these, along with ERP and trade tools, are listed under fashion software, and the broader CAD category covers general-purpose drafting if you are comparing a garment tool with a generic one.

How to decide, step by step

A process that avoids the common mistakes:

  1. Start with the factory. Find out what your production partner runs and which exchange format it takes. If it is AccuMark or Modaris, that narrows the real choice more than any feature table.
  2. Separate pattern making from visualisation. If you need both, price them separately. A 3D tool like VStitcher or CLO does not replace a marker-making module.
  3. Count your people, not your needs. Individual plans exclude companies, and Teams plans cap users. Two employees changes the plan.
  4. Request quotes for the quoted products. For AccuMark, Modaris, Optitex and Centric, ask for a three-year total and for what is included in support and upgrades.
  5. Test a real file end to end. A graded style, exported from your tool, opened by the factory. This is the single most valuable hour of evaluation.
  6. Re-check prices before buying. Browzwear changed its model in February 2026 and Tukatech's figures differ between its own pages. Vendor prices here are accurate to the date they were read and not beyond it.

For a wider view of the field, the CLO against Optitex comparison and the Modaris against Optitex comparison are good next reads.

Questions people ask

How much does Gerber AccuMark cost?

Gerber does not publish a price, and neither do the main third-party listings, which show "contact vendor" or "price on request". AccuMark is sold through Lectra, which owns Gerber, as a one or three year subscription covering software, remote support and upgrades. You need a quote for your modules and seat count. See the AccuMark pricing page.

How much does Lectra Modaris cost?

Lectra does not publish a Modaris price. It is sold by quote on a subscription of one to three years, paid annually, with software, remote support and two upgrades a year included. Prices vary by edition (Essential, Classic, Expert and 3D), country and seats. See the Modaris pricing page.

Is Gerber AccuMark the same as Lectra Modaris?

No. They are separate products with different native formats, but both are owned by Lectra, which completed its acquisition of Gerber Technology on 1 June 2021. They are now sold on one set of subscription terms. The comparison shows the differences.

What is the difference between 2D and 3D fashion software?

2D software creates the flat pattern pieces, grades them across sizes and nests them into markers for cutting. 3D software drapes those pieces on an avatar to judge fit and look before sewing. Factories need the 2D output; brands use 3D to cut the number of physical samples. Many tools now do both to some degree.

How much does CLO 3D cost?

CLO lists $25 a month for students and $50 a month for individuals, with a 25 per cent saving advertised for yearly billing. Companies with two or more employees are directed to Enterprise, which is quoted. Prices exclude tax. See the CLO pricing page.

How much does Browzwear VStitcher cost?

Browzwear lists Freelancer at $75 a month or $750 a year, Freelancer Plus at $150 a month or $1,500 a year, and Teams at $3,950 a year for up to three named users. Enterprise is quoted. Students can apply for a free six-month Learner License. See the VStitcher pricing page.

Is there free pattern making software?

Seamly2D is free and open source under GPLv3 or later, and works on Windows, macOS and Linux. We could not confirm its DXF-AAMA or DXF-ASTM export support from the pages we read, so test it before sending patterns to a factory. Students may also get free or low-cost access to commercial tools, such as Browzwear’s Learner License.

What is DXF-AAMA and do I need it?

It is a DXF-based format for exchanging 2D pattern pieces between CAD systems, created by the American Apparel Manufacturers Association in 1993. ASTM D6673 followed it, though ASTM lists that standard as withdrawn. If your pattern must open in a factory using a different system, you will probably export DXF-AAMA or DXF-ASTM, and you should test the result.

Sources

Every price, limit and date above was checked against these pages on the day shown. Where a figure has since moved, the vendor’s own page is the authority and this one is a snapshot.

  1. 1Why you should switch to Modaris and Gerber AccuMark software subscriptions · LectraEstablishes the one or three year term, annual payment, what the fee includes, digital keys, the trade-in route and that no price is published.Checked
  2. 2Modaris Expert · LectraSource for the Modaris editions, the 3D module, the Pattern Converter for DXF AAMA and ASTM, two upgrades a year and version 2026.2. States no price.Checked
  3. 3CLO plans and pricing · CLO Virtual FashionStudent $25 and Individual $50 a month, Enterprise and Academic quoted, the two-employee rule, 25 per cent yearly saving, prices excluding tax.Checked
  4. 4Browzwear introduces new pricing plans · BrowzwearFebruary 2026 announcement of Freelancer, Freelancer Plus and Teams prices and the Learner License. The pricing page was ambiguous on whether Teams is per user.Checked
  5. 5TUKAcad 2026 subscription offer and TUKAcad Cloud Learning Edition · TukatechBanner price of from $19 a month for TUKAcad 2026; a 2016 article on the same page quotes $25 a month for a learning edition. The two do not reconcile, so verify on tukaweb.com.Checked
  6. 62D Pattern DXF Import Export · CLO Virtual FashionDocuments DXF, DXF-AAMA and DXF-ASTM import and export, grading as a rule file and compatibility with other pattern CAD systems.Checked

Read next

  • Analysis

    When Your Software Gets Acquired: The 2026 Consolidation, and What It Costs You

    In the first eight months of 2026, Airtable agreed to be bought by Bending Spoons, Salesforce agreed to buy Intercom, Autodesk closed on MaintainX and Thoma Bravo completed a twelve billion dollar take-private of Dayforce. Coverage of these deals is written for shareholders. This one is written for the person who has four years of work inside the tool being sold, and wants to know what happens next.

  • Guide

    Project Management Software: Choose By How Your Team Works

    Task trackers, work management platforms, issue trackers and docs-first tools get cross-shopped as if they were the same category. They are not, and per-seat pricing means choosing wrong gets more expensive every time you hire. This guide sorts the four types, prices them as of August 2026, and works through the comparisons people actually search for.

  • Guide

    AIS vessel tracking platforms: what consolidation left you to choose from

    Three of the best known names in ship tracking belong to the same company. Kpler acquired MarineTraffic and FleetMon in 2023, and the effect on a buyer in 2026 is that a comparison which looks like three quotes is often one vendor quoting three ways. This is what each platform is actually for, what the published coverage figures mean, and where the genuinely independent options remain.